199 / 2019-03-25 19:17:55
环氧树脂-PTFE抗蚀减摩涂层制备及性能研究
全文待审
摘要:为了提高钢铁材料在海洋环境下的抗蚀减摩性能,本文制备了环氧树脂-PTFE涂层,并研究了PTFE的疏水性、耐腐蚀性和润滑性能对环氧树脂涂层性能的影响。测试结果表明:当向环氧树脂涂层中添加15wt%PTFE时,涂层的微观结构致密,水接触角由74.81°增加到了100.90°,腐蚀电流密度下降为3.702×10-7A·cm-2,摩擦系数从0.6降到了0.16左右。
关键词:环氧树脂;PTFE; 耐腐蚀性能; 减摩性能
Abstract:In order to improve the anti-friction performance of steel materials in the marine environment, epoxy-PTFE coatings were prepared and the effects of hydrophobicity, corrosion resistance and lubricating properties of PTFE on the properties of epoxy resin coatings were investigated. The results show that when 15wt% PTFE is added to the epoxy coating, the microstructure of the coating is denseis, the water contact angle of the coating increases from 74.81° to 100.90°, and the corrosion current density decreases to 3.702×10-7A·cm-2, meanwhile, the friction coefficient of decreased from 0.6 to 0.16.
Key words: epoxy resin; PTFE; corrosion resistance; antifriction performance
重要日期
  • 会议日期

    04月26日

    2019

    04月28日

    2019

  • 03月25日 2019

    初稿截稿日期

  • 04月28日 2019

    注册截止日期

承办单位
陆军装甲兵学院
装备再制造技术国防科技重点实验室
机械产品再制造国家工程研究中心
国家表面工程实验教学示范中心
联系方式
  • 郭 蕾
  • 134********
  • 梁 义
  • 185********
  • 张广安
  • 187********
  • 段金弟
  • 139********
历届会议
移动端
在手机上打开
小程序
打开微信小程序
客服
扫码或点此咨询