The 18th International Workshop on Junction Technology (IWJT2018) will be held on March 8 - 9, 2018 in Shanghai, China. The IWJT, started in 2000 and was held annually in Japan or China, is an open forum focused on the needs and interest of the community of a junction formation technology in semiconductors. At the past IWJTs, a number of eminent and experienced scientists and engineers from Asia, America, and Europe presented their latest results on junction technology. The workshop will provide a good opportunity for researchers and engineers to present their new research results, and exchange ideas with leading scientists in this field.
Workshop Scope (Papers are solicited in, but not limited to
the following areas)
Doping Technology --- Ion implantation, plasma
doping, gas and solid doping
Annealing Technology --- Rapid thermal process, laser
annealing, flash annealing, SPE, lattice damage and
defects
Junction Technology for Novel CMOS Device
Structures --- Junction for SOI, strained Si, SiGe, Ge,
Schottky barrier S/D MOSFET, FinFET(Tri-gate FET),
and bonding junctions.
Silicides and Contact Technology for CMOS ---
Silicide materials and salicide technology, elevated S/D,
low barrier contact, surface pre-treatment
Junction and Contact Technologies for Compound
Semiconductors and Novel Material Devices ---
Schottky and ohmic contacts to wide bandgap
compound semiconductors, junction and contact
technologies for carbon nanotube, graphene and other
2D or nano-, quantum devices, hetero-junction devices
Contact and Junction Technologies for Energy
Harvesting Devices---solar cells
Characterization for Shallow Junction (1D, 2D) ---
Physical and electrical characterization of ultra-shallow
junction formation, dopant incorporation/activation,
dopant profiling/mapping, novel characterization
techniques
Modeling and Simulation --- Modeling and simulation
of ultra-shallow junction formation, modeling of novel
junction-structure CMOS devices and non-Si based
devices
Equipment, Materials and Substrates for Junction
Technology
Prospective authors are requested to submit the camera-ready full-length papers. Camera-ready full-length late news papers are also accepted. A notice of acceptance will be announced after review. The proceedings will have an IEEE catalogue number and may be collected in IEEE publication database ---- IEEE X’plore. The proceedings will be published before the workshop and distributed at the workshop.
03月08日
2018
03月09日
2018
摘要截稿日期
初稿截稿日期
初稿录用通知日期
终稿截稿日期
注册截止日期
2025年06月05日 日本 Kyoto
2025 22nd International Workshop on Junction Technology2021年06月10日 日本 Kyoto
2021 20th International Workshop on Junction Technology2017年06月01日 日本 Uji
2017 17th International Workshop on Junction Technology2016年05月09日 中国 Shanghai, China
16th International Workshop on Junction Technology2014年05月18日 中国 上海市
2014 14th International Workshop on Junction Technology (IWJT)2013年06月06日 日本
2013 13th International Workshop on Junction Technology
留言